Wheel Spacers 5x114 (5x4.5), 1/2"-20, 70.5mm Hubcentric, 50mm, (2"), Ford +more, (2Pcs)

Details

ECCPP 2PCS 5 Lug 2 inch 5x114.3 to 5x114.3 Hub centric Wheel Spacers 5x4.5 to 5x4.5 Wheel Spacers for 2007-2013 for Ford Edge | 2010-2014 for Ford Taurus 1979-2014 for Ford Mustang

Compatibility List Includes : HUBCENTRIC Wheel Spacers 5X4.5 Fits
1984-1992 Mark 70
1982-2004 Lincoln Town Car
1967-1973 ford Mustang
2007-2013 Ford Edge
2010-2014 Ford Taurus

Installation with Confidence : 5 LUG Wheel Spacers HUBCENTRIC 5X4.5 TO 5X4.5 WHEEL SPACERS with Thickness:2in or 50mm,Vehicle Bolt Pattern:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm,Inner Diameter:70.5mm,Thread Pinch:1/2"-20;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)

Superior Safety And Stability : Hubcentric wheel spacers 5x4.5 WHEEL SPACERS 2in Hubcentric design- support and center the wheel to better resist impact loads from different road conditions and eliminate the r-isk of vibration. Hub-centric design with additional centering collar with perfect fit in mind makes the spacer function as a precise extension of the axle hub,ensuring precise wheel fitment while el-iminating risks from vibration

Strict Quality Performance : 5x114.3 WHEEL SPACERS HUBCENTRIC are CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll

Check before You Purchase : WHEEL SPACERS 5X4.5 Even if a vehicle is listed as being compatible, buyers still need to check:
1) Wheel studs are 1/2 threads;
2) You have more than 2 inch of space between your fender and your wheel/tire;
3) Your factory wheel studs are shorter than 2 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit);
4) Wheel center bore needs to be no smaller than 70.5mm